|
The New AA3215CC / AA3216CW
 Our
newest FAA-PMA edition has our patented Wear Indicator Port that
allows for internal observation of the pump's vanes. The WIP helps
determine if the pump should be replaced, and helps avoid inflight
failure due to a pump exceeding it's life cycle. Fins increase the
cooling surface area by nearly 100% and also decrease weight. Our
improved (inlet and outlet) stator porting reduces peak loads and
improves airflow. The "bi-polar" pumping action helps
maintain balanced rotor loading, reduces wear, and extends life.
Our BY-PASS rotor design helps reduce FOD damage and sticking vanes.
Chemically impregnated vanes and rotor increase natural lubricity,
resist heat damage, and extend life. And, after hundreds of hours
of operation, our pumps can be overhauled.
For technical product support call 1-800-822-3200.
Warranty: 3 years or 1300 hours
Back to Top
The AA241CC / AA242CW Series
 Our
improved (inlet and outlet) stator porting reduces peak loads and
improves airflow. The "bi-polar" pumping action helps
maintain balanced rotor loading, reduces wear, and extends life.
Our BY-PASS rotor design helps reduce FOD damage and sticking vanes.
Chemically impregnated vanes and rotor increase natural lubricity,
resist heat damage, and extend life. Heat-treated, stainless steel
conical pressure plate spring and torsional dampening springs provide
harmonics-free pressure plate control, and smooth temperature compensation.
For technical product support call 800-822-3200.
Warranty: 1 year or 500 hours
Back to Top
The AA441CC / AA442CW Series
 Our
improved (inlet and outlet) stator porting reduces peak loads and
improves airflow. "Bi-polar" pumping action helps maintain
balanced rotor loading, reduces wear, and extends life. Our BY-PASS
rotor design helps reduce FOD damage and sticking vanes. Chemically
impregnated vanes and rotor increase natural lubricity, resist heat
damage, and extend life. Heat-treated, stainless steel, conical
pressure plate spring and torsional dampening springs provide harmonics-free
pressure plate control, and smooth temperature compensation. Stainless
steel pressure plates in 240 and 400 series pumps are hardened,
precision ground, and lapped to reduce internal leakage and wear.
Internal wear surfaces are finished "ultra hard" (RC equivalent
65 or better) for extended life and low friction. Mount flange designed
with extra strong support post to prevent cracking.
For technical product support call 800-822-3200.
Warranty: 1 year or 500 hours
Back to Top
Dry Air Pumps | New Pumps | Overhauled
Pumps | Auxiliary Standby Pumps
|
 |
| Need
help with Dry Air Pumps? Meet Vic Harris,
your point of contact for all your Dry Air Pump questions.
Email
Vic at or call 1-800-822-3200 (US) or 336-449-5054 (International). |
|
