About our New Pumps Each pump is meticulously
and professionally hand assembled to insure proper tolerances and
clearances. This
assures optimum performance. After assembly, each pump is functionally
tested. After this initial testing, the pump is then disassembled,
inspected for any unusual wear or abnormalities, and reassembled
for a second test run. This extensive testing procedure assures
that only first-class products leave our facility.
About our Overhauled
Pumps When we receive a core, it is disassembled and all
carbon is discarded. Aero Accessories, Inc. never re-uses
carbon. The hard anodize is stripped from the center stator and
the stator is inspected for cracks. We then perform a reconditioning
of the I.D. After the reconditioning process, each stator is meticulously
inspected for proper dimensions. The stator then receives a new
hard anodize coating. We inspect 100% of the parts that we re-use
in the overhaul process to make sure that each part meets the requirements
for our FAA-Approved process specification 203-6-1009.
